For AI agents: the complete documentation index is available at https://docs.ovhcloud.com/pt/llms.txt, the full documentation bundle is available at https://docs.ovhcloud.com/pt/llms-full.txt, and this page is available as Markdown at https://docs.ovhcloud.com/pt/guides/bare-metal-cloud/dedicated-servers/encryption-at-rest-enable.md.
Ir para o conteúdo

Enable or disable Encryption at Rest on a dedicated server

Ver como Markdown

Find out how to enable or disable Encryption at Rest on an OVHcloud Dedicated Server from the OVHcloud Console, confirm the operation and follow its status

Objective

Encryption at Rest encrypts all the disks of your Dedicated Server in hardware, and OVHcloud manages the passphrase that unlocks them. This guide explains how to enable or disable Encryption at Rest from the OVHcloud Console and how to follow the operation.

Info

The encryption key stays inside each disk. OVHcloud manages the passphrase that unlocks the disks, and it is never sent to you. Using your own keys is not available. For more information, read What is Encryption at Rest on a dedicated server?

Danger

Enabling or disabling Encryption at Rest erases all the data on the server. Once the operation is complete, you must reinstall the operating system. Back up your data before you start: backing it up is your responsibility.

Requirements


OVHcloud Console Access

  • Direct link:
  • Navigation path: Bare Metal Cloud > Dedicated servers > Select your server

Instructions

This section walks you through enabling Encryption at Rest, following the operation, and disabling it.

Enabling Encryption at Rest

Open the Server tab. The Encryption at rest line of the Hardware card shows the current state of the encryption.

  1. Click Activate Encryption at rest.
  2. In the Encryption at rest activation window, read the warnings: operation duration, protection scope, OS reinstallation and data erasure.
  3. Enter ACTIVATE in the confirmation field.
  4. Click Activate Encryption at rest to start the operation.

If OLA is enabled on the server, or if the server is suspended or blocked, the activation is not available. For more details, see Encryption at Rest requirements and limitations.

Following the operation

The operation is asynchronous. The Encryption at rest line of the Hardware card shows its status:

StatusMeaning
InactiveEncryption at Rest is not enabled on the server.
In progressAn enabling or disabling operation is running. The server restarts on its own one or more times.
ActiveThe disks are encrypted and unlock automatically at each boot.
ErrorThe operation did not succeed and the server keeps its previous state. Try again, or contact support if the error persists.

The operation can take up to 24 hours. If a datacentre intervention is needed, the operation stays in progress until the intervention is over, which can take longer. You do not need to do anything during the operation. While it runs, other operations on the server (reinstallation, reboot, etc.) are refused.

Reinstalling the operating system

When the operation succeeds, the server restarts in rescue mode and you receive an email. The status shows Active (Inactive after disabling). Reinstall the operating system to put the server back into service. Then restore your data from your backup.

Disabling Encryption at Rest

Disabling Encryption at Rest cryptographically erases the disks: the data is not decrypted in place. Back up your data before you start.

On the Server tab, the Encryption at rest line of the Hardware card shows Active.

  1. Click Deactivate Encryption at rest.
  2. In the Encryption at rest deactivation window, read the warnings: operation duration, server restart, end of the protection, OS reinstallation and data erasure.
  3. Enter DEACTIVATE in the confirmation field.
  4. Click Deactivate Encryption at rest to start the operation.

The operation takes up to 24 hours. The server restarts and stays unavailable until it comes back up. The status shows In progress, then Inactive once the operation is complete. Then reinstall the operating system.

If the status shows Error while the disks are still encrypted, the Deactivate Encryption at rest button stays available: you can request the operation again.

Go further

What is Encryption at Rest on a dedicated server?

Manage Encryption at Rest on a dedicated server with the API

Encryption at Rest on dedicated servers: FAQ

Join our community of users.

Esta página foi útil?